Emperor Amplifier

From The Unofficial Epiphone Wiki
Jump to: navigation, search

Contents

Models


Emperor EA-4

  • 1963-1965

Models:

  • EA-4T
  • EA-4TL

Specifications:

  • 35 watts
  • One 10" & One 15" speakers with crossover
  • Jim Lansing speakers (EA-4TL)
  • 4 inputs
  • 2 channels
  • Tremolo
  • 2 Volume controls
  • Independent bass. middle & trebl controls
  • Tremolo depth & frequency controls
  • Footswitch
  • Standby switch
  • 7 tubes
  • 3 X 6EU7, 1 X 6C4, 1 X 6FQ7 preamp
  • 2 X 6L6 power amp
  • 0A2 rectifier
  • Pilot light
  • Removable fuse
  • Standby light
  • Polarity switch
  • Gray vinyl covering
  • Tan grille cloth
  • Top & side-mounted carrying handles
  • Front-mounted control panel
  • Side-latched removable head unit
  • 30"W x 22"T x 12"D



Emperor EA-5

1959 Epiphone Emperor EA-5 1960-1961 Epiphone Emperor EA-5
1959 Epiphone Emperor EA-5
1960-1961 Epiphone Emperor EA-5
File:Ea5panel1.jpg
1959 Epiphone Emperor EA-5
File:Ea5panel2.jpg
1960-1961 Epiphone Emperor EA-5
  • 1959-1961

Models:

  • EA-5
  • EA-5RVT

Specifications:

  • 25 watts RMS / 35 watts peak
  • One 15" speaker
  • 6 tubes
  • 2 channels
  • 4 inputs
  • Independent volume & tone controls
  • High frequency filter for channel 2
  • Reverb with intensity control
  • Tremolo with intensity & frequency controls (EA-5RVT)
  • 3-position on/off/standby switch
  • 3-amp fuse
  • Low distortion output transformer & ground clip
  • Jeweled pilot light
  • Solid wood lock-joint case
  • 22"W x 20"H x 10.125"D
  • Top-mounted carrying handle
  • Top-rear mounted control panel
  • Vinyl covering
  • Tan grille cloth



Emperor EA-5VT

  • 1962-1963

Models:

  • EA-5VT
  • EA-5VTL

Specification:

  • 1959-1961
  • 35 watts
  • One 15" speaker
  • Jim Lansing speaker (EA-5VTL)
  • 9 tubes
  • 2 channels
  • 4 inputs
  • Photon power control
  • Built-in compression circuit
  • Independent volume & tone controls
  • High frequency filter for channel 2
  • Reverb with intensity control
  • Tremolo with intensity & frequency controls
  • Dual footswitch for reverb & tremolo
  • 4-position on/off/standby/polarity switch
  • 3-amp fuse
  • Low distortion output transformer & ground clip
  • Jeweled pilot light
  • Solid wood lock-joint case
  • 22"W x 20"H x 10.5"D
  • Top-mounted carrying handle
  • Top-rear mounted control panel
  • Vinyl covering
  • Tan grille cloth



Electrics | Archtops | Acoustics | Basses | Bluegrass | Amplifiers | Promotional Guitars